12 Volt 80 Amp Forklift Battery Charger

PBM Industrial · Part #: 30-308

$1,740

CALL TO ORDER

🚚 Delivery included to a commercial address, lower 48

The PBM Industrial 12 Volt 80 Amp Battery Chargers are well built for forklift or other industrial applications where a smart charger of high amp output is appropriate, and three phase input is desired or required. There are no manual timers to mess with — the internal charge regulation is handled by the microprocessor for a full charge every time. Economical yet powerful enough for most forklift applications, these chargers are designed to withstand continuous-duty use quietly and efficiently. The linear transformer and microprocessor control give years of trouble-free service. Four-digit LCD display with 12 functions; completes the charge and switches to maintenance mode. For wet-cell lead acid batteries, roughly 400 to 560 AH.

Output

12 Volt 80 Amp

Input

Three Phase

Warranty

5 Years

Approvals

UL · CUL · CE

Request this charger ⚡ Ask a question

Availability: Special order — about 7 weeks out. The larger units ship truck freight (included in the price) to a commercial address with a forklift or loading dock. Any upcharge by the trucking company for limited access, residential delivery, or no off-loading will be collected from the customer.

We verify the DC connector before completing the order. These are usually 175 amp or 350 amp Anderson-type connectors in red, grey, or blue. Color and amp rating are not interchangeable, so we confirm the right one for your application before anything ships.

Specifications

Output	12 Volt 80 Amp
AC Input	208V / 240V / 480V / 600V
AC Current Draw	4.1A/3.6A/1.8A/1.4A
Dimensions (L×W×H)	22.1 x 26.2 x 21.1
Input Phase	Three Phase
Warranty	5 Years
Approvals	UL, CUL, CE

✓ Ferroresonant design
✓ Microprocessor control
✓ 4-digit LCD display, 12 functions
✓ Three phase input
✓ Automatic maintenance mode after full charge
✓ Stackable up to three units high

Fields marked Call to confirm vary by exact unit — we'll verify them with you before your order ships.

Technical features

• Three-phase input supply: 208 / 240 / 480 VAC — 60 Hz frequency.
• Different power-supply voltages available on request.
• Transformer adjustments to ±5% VAC.
• Tropicalized stray-flux transformer; copper windings with double enamel insulation, class H, impregnated with non-toxic resins, kiln-dried.
• Transformer with UL-recognized insulation system for high reliability in difficult operating conditions.
• Low-voltage control circuit (24 VAC).
• Overload cutout on transformer.
• Rectifier bridge with interference-suppressing filters.
• Protection fuses on mains input and DC output.
• Final acceptance test conforming to safety regulations.
• Complete with charging cables and battery connectors.
• Power cord to be installed by the customer.
• Can be stacked up to three units high.
• Charging with decreasing current to 2.4 V/cell, then gas-charging stage begins (adjustable).
• Time-controlled gas charging, adjustable by dip switch (3 hours standard).
• Equalizing charge automatically performed 60 minutes after the last charge cycle.

Get maximum battery life & power

Pair this charger with the 12 Volt PowerPulse desulfator to keep cells healthy and extend battery life. Ask us about adding one to your order.

$49

Ask about add-ons

← Back to all chargers Request this charger ⚡